Show Ip Ospf Virtual-Links - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip ospf virtual-links

Use this command to display virtual link information.
To modify the lines displayed, use the | (output modifier token) ; to save the output to a file,
use the > output redirection token.
Syntax
show ip ospf virtual-links
Exec mode and Privileged Exec mode
Mode
Figure 36-23: Example output from the
Output
To display virtual link information, use the command:
Examples
C613-50007-01 REV B
Virtual Link VLINK0 to router 10.10.0.9 is up
Transit area 0.0.0.1 via interface vlan5
Transmit Delay is 1 sec, State Point-To-Point,
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in 00:00:02
Adjacency state Full
Virtual Link VLINK1 to router 10.10.0.123 is down
Transit area 0.0.0.1 via interface *
Transmit Delay is 1 sec, State Down,
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in inactive
Adjacency state Down
awplus# show ip ospf virtual-links
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show ip ospf virtual-links
OSPF Commands
command
36.77