Debug Ospf Ifsm - Allied Telesis SwitchBlade x908 Series Software Reference Manual

debug ospf ifsm

This command specifies debugging options for OSPF Interface Finite State Machine (IFSM)
troubleshooting.
To enable all debugging options, specify debug ospf ifsm with no additional parameters.
The no and undebug form disables OSPF IFSM debugging. Use this command without
parameters to disable all the options.
Syntax debug ospf ifsm [status] [events] [timers]
no debug ospf ifsm [status] [events] [timers]
undebug ospf ifsm [status] [events] [timers]
Parameter
events
status
timers
Privileged Exec mode and Global Configuration mode
Mode
Examples
terminal monitor
Related Commands
C613-50007-01 REV B
Description
Displays IFSM event information.
Displays IFSM status information.
Displays IFSM timer information.
awplus# no debug ospf ifsm events status
awplus# debug ospf ifsm status
awplus# debug ospf ifsm timers
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
OSPF Commands
36.17