Log Email Time - Allied Telesis SwitchBlade x908 Series Software Reference Manual

log email time

Configures the time used in messages sent to an email address. Use local if the email recipient
is in the same time zone as this device. Messages will display the time as on the local device
when the message was generated. Use offset if the email recipient is in a different time zone to
this device. Specify the time offset of the email recipient, in hours. Messages will display the time
they were generated on this device but converted to the time zone of the email recipient. The
default is local.
Syntax
log email <email-address> time {local|offset{plus|minus}<0-24>}
Parameter
log
email
<email-address>
time
local
offset
plus
minus
<0-24>
Global Configuration mode
Mode
To send messages to the email address admin@homebase.com, with the time information
Examples
converted to the time zone of the email recipient, which is 3 hours ahead of this device, use the
command:
awplus(config)#
show log config
Validation
Commands
default log buffered
Related Commands
C613-50007-01 REV B
Description
Logging control
Send log messages to an email address
The email address to send log messages to
Specify the time difference between the email recipient and the
device being configured
The device is in the same time zone as the email recipient
The device is in a different time zone to the email recipient. Use the
plus or minus keywords and specify the difference in hours.
Negative offset
Positive offset
World Time zone offset in hours
log email admin@homebase.com time offset plus 3
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Logging Commands
10.21