Ipv6 Nd Suppress-Ra - Allied Telesis SwitchBlade x908 Series Software Reference Manual

IPv6 Commands

ipv6 nd suppress-ra

ipv6 nd suppress-ra Command
Use this command to inhibit IPv6 Router Advertisement (RA) transmission for the current
interface. Router advertisements are used when applying IPv6 stateless auto-configuration.
Use no parameter with this command to enable Router Advertisement transmission.
Syntax
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Router Advertisement (RA) transmission is suppressed by default.
Default
Interface mode
Mode
To enable the transmission of router advertisements from interface vlan4 on the switch, use
Example
the following commands:
awplus(config-if)#
ipv6 nd ra-interval
Related Commands
ipv6 nd prefix
25.10
New vs_531 %flag
awplus# configure terminal
awplus(config)# interface vlan4
no ipv6 nd suppress-ra
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
IPv6 Commands This new command is used to inhibit IPv6 Router Advertisement (RA) transmission for the current interface. Router advertisements are used when applying IPv6 stateless auto-configuration.
C613-50007-01 REV B