Privilege Level; Service Advanced-Vty - Allied Telesis SwitchBlade x908 Series Software Reference Manual

User Access Commands

privilege level

This command sets a privilege level for VTY or console connections. This privilege level
overrides a specific user's privilege.
Syntax privilege level
Line mode
Mode
To set the console connection to have the maximum privilege level, use the command:
Example
To set all vty connections to have the minimum privilege level, use the command:
line
Related Commands
username

service advanced-vty

This command enables the advanced-vty help feature. This allows you to use TAB completion
for commands. Where multiple options are possible, the help feature displays the possible
options.
This feature is enabled by default.
The no form disables the advanced-vty help feature.
Syntax
service advanced-vty
no service advanced-vty
Global Configuration mode
Mode
To disable the advanced-vty help feature, use the command:
Examples
5.8
<0-15>
awplus(config)#
awplus(config-line)#
awplus(config)#
awplus(config-line)#
awplus(config)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
line console 0 0
privilege level 15
line vty 0 5
privilege level 1
no service advanced-vty
C613-50007-01 REV B