Show Spanning-Tree Mst Interface - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Spanning Tree Commands

show spanning-tree mst interface

This command displays the number of instances created, and VLANs associated with it for the
specified switch port.
Syntax
show spanning-tree mst interface <port>
Parameter
<port>
Exec mode and Privileged Exec mode and Interface mode
Mode
The following is an output of this command displaying detailed information about each instance,
Example
and all interfaces associated with them for port1.1.4.
awplus#show spanning-tree mst interface port1.1.4
% 1: Bridge up - Spanning Tree Enabled
% 1: CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768
% 1: Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
% 1: CIST Root Id 80000008c73a2b22
% 1: CIST Reg Root Id 80000008c73a2b22
% 1: CST Bridge Id 80000008c73a2b22
% 1: portfast bpdu-filter disabled
% 1: portfast bpdu-guard disabled
% 1: portfast errdisable timeout disabled
% 1: portfast errdisable timeout interval 1 sec
%
% Instance
% 0:
% 1:
% 2:
19.22
Description
The port to display information about. The port may be a switch port (e.g.,
port1.1.4), a static channel group (e.g., sa3), or an LACP channel group
(e.g., po4).
VLAN
1
2-3
4-5
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B