Clock Timezone - Allied Telesis SwitchBlade x908 Series Software Reference Manual

To remove any summertime settings on the system, use the command:
clock summer-time date
Related Commands

clock timezone

show clock
clock timezone
This command defines the device's clock timezone. The timezone is set as a offset to the UTC.
The no parameter resets the system time to UTC.
By default, the system time is set to UTC.
Syntax
clock timezone <timezone-name> {minus|plus} <0-12>
no clock timezone
Parameter
<timezone-name>
minus or
plus
<0-12>
Global Configuration mode
Mode
Configure the timezone before setting the local time. Otherwise, when you change the
Usage
timezone, the device applies the new offset to the local time.
To set the timezone to New Zealand Standard Time with an offset from UTC of +12 hours,
Example
use the command:
To set the timezone back to UTC with no offsets, use the command:
clock set
Related Commands
clock summer-time date
clock summer-time recurring
show clock
C613-50007-01 REV B
awplus(config)# no clock summer-time
Description
A description of the timezone, up to 6 characters long.
The direction of offset from UTC. The minus option indicates that the
timezone is behind UTC. The plus option indicates that the timezone is
ahead of UTC.
The offset in hours from UTC.
awplus(config)# clock timezone NZST plus 12
awplus(config)# no clock timezone
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
System Configuration and Monitoring Commands
8.9