Route Map Commands
set comm-list delete
Use this command to delete one or more communities from the community attribute of a BGP
update message. Specify the communities to delete by specifying a community list. To create
the community list, enter Global Configuration mode and use the ip community-list
command.
When a BGP update message matches the route map entry, the device deletes the specified
communities from the update's comm.unity attribute.
Use the no parameter to stop deleting the communities.
Syntax
set comm-list {<1-199>|<100-199>|<word>} delete
no set comm-list {<1-199>|<100-199>|<word>} delete
Parameter
<1-99>
<100-199>
<word>
Route-map mode
Mode
This command is valid for BGP update messages only.
Usage
To use entry 3 of the route map called myroute to delete the communities in community list
Examples
34 from matching update messages, use the commands:
awplus(config-route-map)#
ip community-list
Related Commands
match community
route-map
set community
show route-map
39.22
Description
Standard community-list number.
Expanded community-list number.
Name of the Community-list.
awplus#
awplus(config)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
configure terminal
route-map myroute permit 3
set comm-list 34 delete
C613-50007-01 REV B