Switchport Private-Vlan Host-Association - Allied Telesis SwitchBlade x908 Series Software Reference Manual

VLAN Commands

switchport private-vlan host-association

Use this command to associate a primary vlan and a secondary vlan to a host port. Only one
primary and secondary vlan can be associated to a host port.
Use the no form of this command to remove the association.
Syntax
switchport private-vlan host-association <primary-vlan-id> add
no switchport private-vlan host-association
Parameter
<primary-vlan-id>
<secondary-vlan-id>
Interface mode
Mode
Examples
awplus(config-if)#
awplus(config-if)#
17.12
<secondary-vlan-id>
Description
VLAN ID of the primary vlan
VLAN ID of the secondary vlan (either isolated or community)
awplus# configure terminal
awplus(config)# interface port1.0.2
switchport private-vlan host-association 2 add 3
awplus# configure terminal
awplus(config)# interface port1.0.2
no switchport private-vlan host-association
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B