Spanning-Tree Errdisable-Timeout Enable - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Spanning Tree Commands

spanning-tree errdisable-timeout enable

Use this command to enable the errdisable-timeout facility, which sets a timeout for ports that
are disabled due to the BPDU guard feature.
Use this command for RSTP or MSTP.
Syntax
spanning-tree errdisable-timeout enable
no spanning-tree errdisable-timeout enable
Global Configuration mode
Mode
By default, the errdisable-timeout is disabled.
Default
The BPDU guard feature shuts down the port on receiving a BPDU on a BPDU-guard enabled
Usage
port. This command associates a timer with the feature such that the port is re-enabled
without manual intervention after a set interval. This interval can be configured by the user
using the
Example
awplus(config)#
show spanning-tree
Related Commands
spanning-tree errdisable-timeout interval
spanning-tree portfast bpdu-guard
19.26
spanning-tree errdisable-timeout interval
awplus# configure terminal
spanning-tree errdisable-timeout enable
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
command.
C613-50007-01 REV B