boot system
This command specifies the release file to load during the next boot cycle.
Syntax
boot system <filename>
Parameter
<filename>
Global Configuration mode
Mode
To run the release file r1-5.3.1.rel the next time the device boots up, use the command:
Examples
boot config-file
Related Commands
boot backup
show boot
cd
This command changes the current working directory.
Syntax
cd <directory-url>
Parameter
<directory-url>
Privileged Exec mode
Mode
To change to the directory called images, use the command:
Examples
dir
Related Commands
pwd
show file systems
C613-50007-01 REV B
Description
Name of a release file. The specified file must exist in the root
directory of the flash file system. Valid release files must have a .rel
extension.
awplus(config)#boot system rl-
Description
URL of the directory.
awplus#cd images
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
File Management Commands
5.3.1
.rel
7.5