Debug Ospf Nsm - Allied Telesis SwitchBlade x908 Series Software Reference Manual

OSPF Commands

debug ospf nsm

This command enables debugging options for the OSPF Network Service Module.
To enable both debugging options, specify debug ospf nsm with no additional parameters.
The no and undebug form disables OSPF NSM debugging. Use this command without
parameters to disable both options.
Syntax
debug ospf nsm [interface] [redistribute]
no debug ospf nsm [interface] [redistribute]
undebug ospf nsm [interface] [redistribute]
Parameter
interface
redistribute
Priviledged Exec mode and Global Configuration mode
Mode
Examples
terminal monitor
Related Commands
36.20
Description
Specify NSM interface information.
Specify NSM redistribute information.
awplus# debug ospf nsm interface
awplus# no debug ospf nsm redistribute
awplus# undebug ospf nsm interface
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B