Edit - Allied Telesis SwitchBlade x908 Series Software Reference Manual

File Management Commands

edit

This command opens a text file in the AlliedWare Plus
use the editor to alter to the file.
If a filename is specified and it already exists, then the editor opens it in the text editor.
If no filename is specified, the editor prompts you for one when you exit it.
Before starting the editor make sure your terminal, terminal emulation program, or Telnet
client is 100% compatible with a VT100 terminal. The editor uses VT100 control sequences to
display text on the terminal.
For more information about using the editor, including control sequences, see
editor" on page
Syntax
edit [<filename>]
Parameter
<filename>
Privileged Exec mode
Mode
To create and edit a new text file, use the command:
Examples
To edit the existing configuration file "myconfig.cfg" stored on your device's flash memory,
use the command:
edit URL
Related Commands
show file
7.14
6.6.
Description
Name of a file in the local flash file system.
awplus#edit
awplus#edit myconfig.cfg
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
TM
text editor. Once opened you can
"Using the
C613-50007-01 REV B