Max-Static-Routes; Service Advanced-Vty - Allied Telesis SwitchBlade x908 Series Software Reference Manual

max-static-routes

Use this command to set the maximum number of static routes, excluding fib routes.
Note that fib routes are set and reset using max-fib-routes.
Use the no max-static-routes command to set the maximum number of static routes to the
default value of 1000 static routes.
Syntax
max-static-routes <1-1000>
no max-static-routes
Global Configuration mode
Mode
The default number of static routes is the maximum number of static routes (1000).
Mode
To reset the maximum number of static routes to the default maximum issue the command:
Example
max-fib-routes
Related Commands

service advanced-vty

Use this command to enable the advanced mode VTY interface. This sets multiple options to
be listed when the Tab key is pressed, after completing a command.
Use the no version of this command to set no options to be listed when the Tab key is
pressed, after completing a command.
Syntax service advanced-vty
no service advanced-vty
Global Configuration mode
Mode
Enabled
Default
This feature applies to commands with more than one option.
Usage
Example
awplus(config)#
C613-50007-01 REV B
awplus# configure terminal
awplus(config)# no max-static-routes
awplus# configure terminal
service advanced-vty
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
System Configuration and Monitoring Commands
8.13