Show Ip Rip Interface - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIP Commands

show ip rip interface

Use this command to display information about the RIP interfaces. You can specify an interface
name to display information about a specific interface.
To modify the lines displayed, use the | (output modifier token); to save the output to a file
use the > output redirection token.
Syntax
show ip rip interface [<ifname>]
Parameter
<ifname>
Exec mode and Privileged Exec mode
Mode
The following is the output from the show ip rip interface command. This output shows the RIP
Example
related configuration of each IP interface.
awplus#
32.34
Description
Name of the interface for which information is to be displayed.
show ip rip interface
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B