Router Bgp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

BGP Commands

router bgp

Use this command to configure a BGP routing process.
Use the no parameter with this command to disable a routing process.
Syntax
router bgp ASN
no router bgp ASN
Parameter
ASN
Global Configuration mode
Mode
The router bgp command enables a BGP routing process so you can setup a route server
Usage
Example
awplus(config-router)#
router bgp view
Related Commands
38.100
Description
<1-65525> Specifies the Autonomous System (AS) number.
router bgp 1
neighbor 10.0.0.1 remote-as 2
neighbor 10.0.0.2 remote-as 3
!
router bgp 2
neighbor 10.0.0.3 remote-as 4
neighbor 10.0.0.4 remote-as 5
awplus#
awplus(config)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
configure terminal
router bgp 12
C613-50007-01 REV B