Clear Ip Bgp Dampening - Allied Telesis SwitchBlade x908 Series Software Reference Manual

BGP Commands

clear ip bgp dampening

Use this command to clear route dampening information and unsuppress routes that have
been suppressed routes.
Syntax
clear ip bgp dampening [<ip-address>|<ip-address/m>]
clear ip bgp ipv4 <prefix> dampening [<ip-address>|<ip-address/m>]
Parameter
<ip-address>
<ip-address/m>
ipv4
<prefix>
unicast
multicast
Privileged Exec mode
Mode
Example
awplus#
awplus#
38.38
Description
Specifies the IPv4 address for which BGP dampening is to be cleared,
entered in the form A.B.C.D.
Specifies the IPv4 address with mask for which BGP dampening is to be
cleared, entered in the form A.B.C.D/M. Where M is the subnet mask
Clears all IPv4 address family peers. Configure parameters relating to
the BGP exchange of IPv4 prefixes.
{unicast|multicast}
unicast address family modifier. Configure parameters relating to the
BGP exchange of routes to unicast destinations.
multicast address family modifier. Configure parameters relating to the
BGP exchange of routes to multicast sources.
clear ip bgp dampening 10.10.0.121
clear ip bgp ipv4 unicast dampening
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B