Telnet Server - Allied Telesis SwitchBlade x908 Series Software Reference Manual

User Access Commands

telnet server

This command enables the telnet server on the specified TCP port. If the server is already
enabled then it will be restarted on the new port. Changing the port number does not affect
the port used by existing sessions.
Syntax
telnet server [<1-65535>|default]
Parameter
<1-65535>
default
Global Configuration mode
Mode
To enable the telnet server on TCP port 2323, use the command:
Example
show telnet
Related Commands
5.14
Description
The TCP port to listen on.
Use the default TCP port number 23.
awplus(config)# telnet server 2323
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B