Global Configuration Mode - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Getting Started

Global Configuration mode

Configure commands:
1.34
terminal Set terminal line parameters
test Test device functionality
traceroute Trace route to destination
trigger Automatic scripted responses to device events
undebug Disable debugging functions (see also 'debug')
wait Wait for a specified number of seconds
write Write running configuration to memory, file or
terminal
awplus(config)#
access-list
arp
auth-web-server Web authentication server configuration
commands
banner
bgp
boot
class-map
clock
crypto
cvlan
debug
default
do
dot1x
enable
epsr
exception
exit
fib
help
hostname
interface
ip
ipv6
key
lacp
line
log
loop-protection
mac
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
?
Add an access list entry
Address Resolution Protocol (ARP)
Define a login banner
Border Gateway Protocol (BGP)
Boot configuration
Class map command
Manage clock
Security Specific Commands
Configure C-VLAN parameters
Debugging functions (see also 'undebug')
Restore default settings
To run exec commands in config mode
IEEE 802.1X Port-Based Access Control
Modify enable password parameters
Ethernet Protection Switching Ring (EPSR)
Configure exception settings
End current mode and down to previous mode
FIB information
Description of the interactive help system
Set system's network name
Select an interface to configure
Internet Protocol (IP)
Internet Protocol version 6 (IPv6)
Authentication key management
LACP commands
Configure a terminal line
Logging control
Loop Protection
mac address
C613-50007-01 REV B