Copy Running-Config - Allied Telesis SwitchBlade x908 Series Software Reference Manual

File Management Commands

copy running-config

This command copies the running-config to a destination file, or copies a source file into the
running-config. Commands entered in the running-config do not survive a device reboot unless
they are saved in a configuration file.
Syntax
copy <source-url> running-config
copy running-config <destination-url>
copy running-config startup-config
Parameter
<source-url>
<destination-url>
startup-config
Privileged Exec mode
Mode
To copy the file layer3.cfg into the running-config:
Examples
To use SCP to copy the running-config as current.cfg to the remote server listening on
TCP port 2000, use the command:
current.cfg
copy startup-config
Related Commands
write file
write memory
7.8
Description
The URL of a configuration file. This must be a valid configuration
file with a .cfg filename extension. Specify this when you want the
script in the file to become the new running-config. The URL can
contain the following protocols or location words. See
Syntax and Keyword Usage" on page 7.3
The URL where you would like the current running-config saved.
This command creates a file if no file exists with the specified
filename. If a file already exists, then the CLI prompts you before
overwriting the file. See
page 7.3
Copies the running-config into the file set as the current startup-
config file.
awplus#copy layer3.cfg running-config
awplus#copy running-config scp://user@server:2000/config_files/
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
"URL Syntax and Keyword Usage" on
for valid URL syntax.
"URL
for valid URL syntax.
C613-50007-01 REV B