Line - Allied Telesis SwitchBlade x908 Series Software Reference Manual

line

Use this command to move to line configuration mode for the specified VTYs or the console.
Syntax
line vty <first-line> [<last-line>]
line console 0
Parameter
<first-line>
<last-line>
Global Configuration mode
Mode
The following example shows the use of the line command to enter the Line command
Example
mode in order to configure all VTYs (note the change in the prompt).
awplus(config-line)#
C613-50007-01 REV B
Description
<0-32> Specify the first line number.
<0-32> Specify the last line number.
awplus(config)# line vty 0 32
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
User Access Commands
5.7