Debug Ip Irdp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

debug ip irdp

This command enables debugging of ICMP Router Discovery Protocol (IRDP) events and
messages on your device. IRDP debugging is disabled by default.
■
■
■
■
■
■
■
The no form disables IRDP debugging.
■
Syntax
debug ip irdp {event|nsm|receive|send|both|detail|all}
no debug ip irdp {event|nsm|receive|send|both|detail|all}
Parameter
event
nsm
receive
send
both
detail
all
Privileged Exec mode and Global Configuration mode
Mode
IRDP protocol debugging is disabled by default
Default
To enable IRDP input packet process debugging, use the command:
Examples
To disable all IRDP debugging, use the command:
ip irdp
Related Commands
router ip irdp
show ip irdp
C613-50007-01 REV B
If event is specified, then IRDP events related debugging will be enabled.
If nsm is specified, then IRDP processing of NSM messages debugging will be enabled.
If receive is specified, then IRDP input packet processing debugging will be enabled.
If send is specified, then IRDP output packet processing debugging will be enabled.
If both is specified, then both IRDP input and output packet processing debugging will be
enabled.
If detail is specified, then both IRDP detailed input and output packet processing
debugging will be enabled.
If all is specified, then all IRDP debugging will be enabled.
Note that setting detail also sets both, so if you set detail, the output will show "packet
debugging mode is all". Negating any packet debug mode will switch detail off.
Description
Enables debugging of IRDP events.
Enables debugging of IRDP processing of NSM messages.
Enables debugging of IRDP input packet processing.
Enables debugging of IRDP output packet processing.
Enables debugging of both IRDP input and output packet processing.
Enables detailed debugging of both IRDP input and output packet processing.
Enables all IRDP debugging types.
awplus# debug ip irdp receive
awplus# no debug ip irdp all
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
IP Addressing and Protocol Commands
23.7