Match Ipv6 Address - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Switchblade x908/x900 series alliedware plus operating system software reference for version 5.3.1
Hide thumbs Also See for SwitchBlade x908 Series:
Table of Contents

Advertisement

Route Map Commands

match ipv6 address

Use this command to specify the match address of route.
Use the no parameter with this command to remove the match ipv6 address entry.
Syntax
match ipv6 address {<access-list-name>|prefix-list <prefix-listname>}
no match ipv6 address [<access-list-name>|prefix-list <prefix-
listname>]
Parameter
<access-list-name>
<prefix-listname>
Route-map mode
Mode
The match ipv6 address <access-list> command specifies the IPv6 address to
Usage
be matched. If there is a match for the specified IPv6 address, and permit is specified, the
route is redistributed or controlled as specified by the set action. If the match criteria are met,
and deny is specified, the route is not redistributed or controlled. If the match criteria are not
met, the route is neither accepted nor forwarded, irrespective of permit or deny
specifications.
The match ipv6 address prefix-list command specifies the entries of prefix-lists
to be matched. If there is a match for the specified prefix-list entries, and permit is specified,
the route is redistributed or controlled as specified by the set action. If the match criteria are
met, and deny is specified, the route is not redistributed or controlled. If the match criteria are
not met, the route is neither accepted nor forwarded, irrespective of permit or deny
specifications.
Examples
awplus(config-route-map)#
awplus(config-route-map)#
39.10
Description
The name of the IPv6 access list that specifies criteria for the
addresses to match.
Valid only with BGP and RIPng.
The name of the IPv6 prefix list that specifies criteria for the
addresses to be matched.
Valid only with BGP and RIPng.
awplus#
awplus(config)#
awplus#
awplus(config)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
configure terminal
route-map rmap1 deny 1
match ipv6 address rmap1
configure terminal
route-map rmap1 permit 3
match ipv6 address prefix-list mylist
C613-50007-01 REV B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents