Ip Domain-List - Allied Telesis SwitchBlade x908 Series Software Reference Manual

ip domain-list

This command adds a domain to the DNS list. Domain are appended to incomplete host
names in DNS requests. Each domain in this list is tried in turn in DNS lookups. This list is
ordered so that the first entry you create is checked first.
If there are no domains in the DNS list, then your device uses the domain specified with the
domain-name
domain set using the ip domain-name command.
The no parameter deletes a domain from the list.
Syntax
ip domain-list <domain_name>
no ip domain-list <domain_name>
Parameter
<domain_name>
Global Configuration mode
Mode
To add the domain example.net to the DNS list, use the commands:
Example
awplus(config)#
ip domain-lookup
Related Commands
ip domain-name
show ip domain-list
C613-50007-01 REV B
command. If any domain exists in the DNS list, then the device does not use the
Description
Domain string, for example "company.com".
awplus# configure terminal
ip domain-list example.net
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
IP Addressing and Protocol Commands
23.9
ip