Copy Local - Allied Telesis SwitchBlade x908 Series Software Reference Manual

copy LOCAL

This command copies a file between local file systems. This allows you to copy a file stored on
flash memory to or from a different memory type attached to your device, such as an SD card.
By default, the destination filename is the same as the source file.
Syntax
copy <local-source> <local-destination> <filename>
Parameter
<local-source>
<local-destination>
<filename>
Privileged Exec mode
Mode
To copy the file newconfig.cfg onto your device's flash from an SD Card, use the
Examples
command:
copy URL
Related Commands
copy zmodem
show file
show file systems
C613-50007-01 REV B
Description
File system where the original file is stored.
card
flash
File system where the file is copied to.
card
flash
Filename of the file you are copying.
awplus#copy card flash newconfig.cfg
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Copies the file from an attached SD card.
Copies the file from Flash memory.
Copies the file from an attached SD card
Copies the file to Flash memory.
File Management Commands
7.7