Show Ipv6 Protocols Rip - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ipv6 protocols rip

show ipv6 protocols rip Command
Use this command to display RIPng process parameters and statistics.
To modify the lines displayed, use the | (output modifier token); to save the output to a file use
the > output redirection token.
Syntax
show ipv6 protocols rip
Privileged Exec mode and Exec mode
Mode
Example
The following is a sample output from the show ipv6 protocols rip command.
Output
C613-50007-01 REV B
New vs_531 %flag
awplus# show ipv6 protocols rip
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF,
I - IS-IS,
B - BGP, a - aggregate, s - suppressed
Network Next Hop If Met Tag Time
R 3ffe:1234:5678::/64 fe80::3 vlan3 3 0 02:28
C 3ffe:ffff:1::/64 :: vlan2 1 0
Ra 3ffe:ffff:2::/48 -- 1 0
Rs 3ffe:ffff:2::/48 fe80::3 vlan3 3 0 02:32
Cs 3ffe:ffff:2::/64 :: vlan3 1 0
R 3ffe:ffff:ffff:ffff::/64 fe80::3 vlan3 3 0 02:28
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
RIPng Commands Use this command to display RIPng process parameters and statistics.
RIPng Commands
34.15