Show Ip Irdp Interface - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip irdp interface

This command displays the configuration of IRDP on all interfaces, or for a specified interface.
To modify the lines displayed, use the | (output modifier token); to save the output to a file, use
the > (output redirection token).
Syntax
show ip irdp interface [<interface-name>]
Parameter
<interface-name>
Exec mode and Privileged Exec mode
Mode
To display the IRDP configuration for vlan4, use the command:
Example
Figure 23-9: Example output from the
Output
vlan13 is up, line protocol is up
ICMP Router Discovery Protocol
Sending mode
Router Lifetime
Default Preference
Min Adv Interval
Max Adv Interval
Next advertisement in 551 seconds
Non default prefix preferences
192.168.1.1
In packets
In bad packets
In good packets
In ignored packets
C613-50007-01 REV B
Description
Displays the interface status and configuration details of the specified
interface.
awplus# show ip irdp interface vlan4
multicast
1350 seconds
0
450 seconds
600 seconds
preference 25000
0
0
0
0
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
IP Addressing and Protocol Commands
show ip irdp interface command
Out packets
Out bad packets
Out good packets
3
0
3
23.37