Exception Coredump Size - Allied Telesis SwitchBlade x908 Series Software Reference Manual

exception coredump size

Core files are generated when a process crashes. The size of a core file can vary, its upper limit
is controlled by this command. Files larger than this limit will be truncated by reducing the
amount of stack and variable information stored.
Truncated core files may make debugging the failure difficult if not impossible. Reducing the
amount of data stored in a core file is not recommended, however the facility is provided to
reduce the amount of flash used.
Use the no version of this command to restore the core file size to its default (unlimited).
This setting only applies to processes created after this command has been executed, to ensure
this is applied to all processes the system will need to be restarted.
Syntax
exception coredump size {none|small|medium|large|unlimited}
no exception coredump size
Parameter
exception
coredump
size
no
none
small
medium
large
unlimited
Global Configuration mode
Mode
Unlimited
Default
To restrict the size of the core file created, use the command:
Examples
awplus(config)#
To restore the size of the core files created to the default of unlimited, use the command:
awplus(config)#
C613-50007-01 REV B
Description
Configure exception settings
Configure coredump attributes
Configure the size of coredump files
Negate a command or set its defaults
Don't create corefiles
Create small corefiles
Create medium corefiles
Create large corefiles (default)
Create corefiles as large as necessary
awplus# configure terminal
exception coredump size small
awplus# configure terminal
no exception coredump size
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Logging Commands
10.9