Key Chain - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIP Commands

key chain

Use this command to enter the key chain management mode and to configure a key chain with
a key chain name. Use the no parameter on this command to remove the key chain and all
configured keys.
Syntax
key chain <key-chain-name>
no key chain <key-chain-name>
Parameter
<key-chain-name>
Global Configuration mode
Mode
This command allows you to enter the keychain mode from which you can specify keys on this
Usage
key chain.
The following example shows the creation of a key chain named mychain and the change
Example
into keychain mode prompt.
awplus(config-keychain)#
key
Related Commands
key-string
accept-lifetime
send-lifetime
32.20
Description
Specify the name of the key chain to manage.
awplus#
awplus(config)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
configure terminal
key chain mychain
C613-50007-01 REV B