Chapter 1. Getting Started; Introduction; How To Log-In; How To Get Command Help - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Getting Started

Introduction

This chapter introduces a number of commonly-used management features of the AlliedWare
Plus

How to log-in

Step 1:
The default baud rate is 9600.
By default the AlliedWare Plus
port. This means that the terminal size is 80 columns by 24 rows.
Step 2:
The defaults are:
username: manager
password: friend
The switch logs you into User Exec mode. From User Exec mode, you can perform high-level
diagnostics (some show commands, ping, traceroute etc), start sessions (Telnet, SSH), and
change mode.

How to get command help

The following kinds of command help are available:
■
■
■
Command The AlliedWare Plus CLI contains a number of abbreviations for its commands. For example,
Abbreviations the show interface command can be entered in the abbreviated form shown below:
1.2
TM
operating system (OS).
Set the console baud rate
TM
Login with manager/friend
lists of valid parameters with brief descriptions (the ? key)
completion of keywords (the Tab key)
error messages for incomplete or incorrect syntax
awplus#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
OS supports VT100 compatible terminals on the console
sh in vlan100
C613-50007-01 REV B