Debug Ipv6 Rip - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIPng Commands

debug ipv6 rip

debug ipv6 rip Command
Use this command to enable RIPng debugging and specify debugging for RIPng events, RIPng
packets, or RIPng communication with NSM processes.
Use the no parameter to disable RIPng debugging.
Syntax
debug ipv6 rip [all|events|nsm|packet [detail]|recv [detail]|
no debug ipv6 rip [all|events|nsm|packet [detail]|recv [detail]|
Parameter
all
events
nsm
packet
recv
send
detail
RIPng debugging is disabled by default.
Default
Privileged Exec mode and Global Configuration mode
Mode
Example
34.4
New vs_531 %flag
send [detail]]
send [detail]]
Description
Displays all RIPng debugging showing RIPng events debug information, RIPng
received packets information, and RIPng sent packets information.
Displays RIPng events debug information.
Displays RIPng and NSM communication.
Displays RIPng packets only.
Optional. Displays information for received packets.
Optional. Displays information for sent packets.
Optional. Displays detailed information for the sent or received packet.
awplus# debug ipv6 rip events
awplus# debug ipv6 rip packet send detail
awplus# debug ipv6 rip nsm
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
RIPng Commands Use this command to enable RIPng debugging and specify debugging for RIPng events, RIPng packets, or RIPng NSM communication.
C613-50007-01 REV B