Show Memory Pools - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show memory pools

This command shows the memory pools used by processes.
Syntax
show memory pools [<process>]
Parameter
<process>
Exec mode and Privileged Exec mode
Mode
To shows the memory pools used by processes, use the command:
Example
Figure 8-7: Example output from the show memory pools command
Output
Parameter
name
pid
size
peak
data
stack
show memory allocations
Related Commands
show memory history
C613-50007-01 REV B
Description
Displays the memory pools used by the specified process.
awplus#
Memory pools for BGP
----------------------
name bgpd; pid 1207; size 1996; peak 8640; data 2012; stack 84
pool
----
LDP Id
Memory diagnostics
Message of The Day
Host config
Link list
Rmap
Temporary memory
Vector
.
.
.
Application Total (kb)
Description
Short name used to describe the process.
Identifier for the process.
Amount of memory in kB used by the process.
Peak amount of memory in kB ever used by the process.
Amount of memory in kB used for data.
The stack size in kB.
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
System Configuration and Monitoring Commands
show memory pools
allocated
---------
296
2508
96
8
320
64
113440
21992
283
8.27