Move Debug; Pwd - Allied Telesis SwitchBlade x908 Series Software Reference Manual

File Management Commands

move debug

This command moves a specified debug file to a destination debug file. Specify whether the
destination is Flash or Card when saving the software to the local file system.
Syntax
move debug {<destination-url>|card|debug|flash|nvs|scp|tftp}
Parameter
<destination-url>
<source-url>
Privileged Exec mode
Mode
To move debug output onto a SD card with a filename my-debug, use the following
Examples
command:
awplus#move debug card:mydebug
Enter source file name []:
copy debug
Related Commands
delete debug

pwd

This command prints the current working directory.
Syntax
pwd
Privileged Exec mode
Mode
To print the current working directory, use the command:
Examples
cd
Related Commands
7.18
{<source-url>|card|debug|flash|nvs|scp|tftp}
Description
The URL where you would like the debug output moved to. See
"URL Syntax and Keyword Usage" on page 7.3
syntax.
The URL where the debug output originates. See
Keyword Usage" on page 7.3
awplus#pwd
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
for valid URL
"URL Syntax and
for valid URL syntax.
C613-50007-01 REV B