Switchport Enable Vlan - Allied Telesis SwitchBlade x908 Series Software Reference Manual

VLAN Commands

switchport enable vlan

Enables the VLAN on the port manually once disabled by certain actions, such as QSP/EPSR. If
the VID is not given, all the disabled VLAN will be re-enabled.
Syntax
switchport enable vlan [<1-4094>]
Parameter
switchport
enable
vlan
<1-4094>
Interface Mode
Mode
To re-enable the port1.0.1 from vlan1:
Example
awplus(config-if)#
show mls qos interface storm-status
Related Commands
storm-window
17.8
Description
Switchport
Re-enables the vlan on the port
Re-enables the vlan on the port
VLAN ID
awplus# configure terminal
awplus(config)# interface port1.0.1
switchport enable vlan 1
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B