Ip Irdp Broadcast - Allied Telesis SwitchBlade x908 Series Software Reference Manual

ip irdp broadcast

This command configures broadcast Router Discovery advertisements on an interface. The
interface sends IRDP advertisements with the broadcast address (255.255.255.255) as the IP
destination address.
The no form configures multicast Router Discovery advertisements on an interface. The
interface sends IRDP advertisements with the all-system multicast address (224.0.0.1) as the IP
destination address.
Syntax
ip irdp broadcast
no ip irdp broadcast
Interface mode
Mode
To enable broadcast Router Discovery advertisements on vlan13, use the commands:
Examples
awplus(config-if)#
To enable multicast Router Discovery advertisements on vlan13, use the commands:
ip irdp
Related Commands
ip irdp multicast
show ip irdp interface
C613-50007-01 REV B
awplus# configure terminal
awplus(config)# interface vlan13
ip irdp broadcast
awplus# configure terminal
awplus(config)# interface vlan13
awplus(config-if)# no ip irdp broadcast
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
IP Addressing and Protocol Commands
23.19