How To See System Information; Viewing Overall System Information - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Getting Started

How to see system information

This section describes how to view the following system information:
■
■
■

Viewing overall system information

To display an overview of the switch hardware, software, and system settings, enter User Exec
or Privileged Exec mode and enter the command:
The output looks like this:
Figure 1-11:
Switch System Status
Board ID Bay
--------------------------------------------------------------------------------
Base 280
PSU 212 PSU2
Fan module 214 PSU1
--------------------------------------------------------------------------------
RAM: Total: 514264 kB Free: 372404 kB
Flash: 31.0MB Used: 14.8MB Available: 16.2MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime
Bootloader version : 1.0.9
Current software
Software version
Build date
Current boot config: flash:/default.cfg (file exists)
Territory
System Name
System Contact
System Location
1.20
overview information
details of temperature and voltage
serial number
awplus#
Board Name
x900-24XT-N
AT-PWR01-AC
AT-FAN01
: 0 days 02:12:03
: r1-5.3.1.rel
: 5.3.1
: Mon Dec 15 14 13:04:00 NZDT 2008
: japan
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show system
Fri Dec 5 02:55:58 2008
Rev Serial number
A-0 45AX5300X
B-1 61400717
F-1 66111841
C613-50007-01 REV B