Ospf Router-Id - Allied Telesis SwitchBlade x908 Series Software Reference Manual

ospf router-id

Use this command to specify a router ID for the OSPF process.
Use the no parameter with this command to disable this function.
Syntax
ospf router-id <ip_address>
no ospf router-id
Parameter
<ip_address>
Router mode
Mode
Configure each router with a unique router-id. In an OSPF router process that has active
Usage
neighbors, a new router-id takes effect at the next reload or when you restart OSPF manually.
The following example shows a specified router ID 2.3.4.5.
Examples
awplus(config-router)#
show ip ospf
Related Commands
C613-50007-01 REV B
Description
Specifies the router ID in IPv4 address format.
awplus# configure terminal
awplus(config)# router ospf 100
ospf router-id 2.3.4.5
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
OSPF Commands
36.49