Getting Started
This results in the following output at login:
Removing the
To return to the default banner (AlliedWare Plus OS version and build date), enter the
banner
command:
To remove the banner instead of replacing it, enter the command:
How to set the time and date
There are three aspects to setting the time and date:
■
■
■
Instead of manually setting the time, you can use NTP to automatically get the time from
another device.
How to show current settings
To display the current time, timezone and date, enter Privileged Exec mode and enter the
command:
The output looks like this:
1.24
awplus login: manager
Password:
this is a new banner
awplus>
awplus(config)#
awplus(config)#
setting the current time and date
setting the timezone
("How to set the timezone" on page
configuring the switch to automatically change the time when summer-time begins and
ends
("How to configure summer-time" on page
awplus#
UTC Time:
Wed,
3 Dec 2008 16:08:14 +0000
Timezone: UTC
Timezone Offset: +00:00
Summer time zone: None
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
banner motd default
no banner motd
("How to set the time and date" on page
1.25)
show clock
1.25)
1.25)
C613-50007-01 REV B