Ip Domain-Name - Allied Telesis SwitchBlade x908 Series Software Reference Manual

ip domain-name

This command sets a default domain for the DNS. The DNS client appends this domain to
incomplete host-names in DNS requests.
If there are no domains in the DNS list (created using the
device uses the domain specified with this command. If any domain exists in the DNS list, then
the device does not use the domain configured with this command.
When your device is using its DHCP client for an interface, it can receive Option 15 from the
DHCP server. This option replaces the domain name set with this command. See
Dynamic Host Configuration Protocol (DHCP) Introduction
DHCP and DHCP options.
The no parameter removes the domain-name previously set by this command.
Syntax ip domain-name <domain_name>
no ip domain-name <domain_name>
Parameter
<domain_name>
Global Configuration mode
Mode
To configure the domain name
Example
awplus(config)#
ip domain-list
Related Commands
show ip domain-list
show ip domain-name
C613-50007-01 REV B
Description
Domain string, for example "company.com".
awplus# configure terminal
ip domain-name company.com
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
IP Addressing and Protocol Commands
ip domain-list command) then your
Chapter 70,
for more information about
23.11