Log Buffered - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Logging Commands

log buffered

Configures the device to store log messages in RAM. Messages stored in RAM are not retained
on the device over a restart. Once the buffered log reaches its configured maximum allowable
size old messages will be deleted to make way for new ones. The buffered log is configured by
default.
Syntax log buffered
no log buffered
Parameter
no
log
buffered
Global Configuration mode
Mode
To configured the device to store log messages in RAM use the command:
Examples
awplus(config)#
To configure the device to not store log messages in a RAM buffer use the command:
awplus(config)#
show log config
Validation
Commands
default log buffered
Related Commands
log buffered (filter)
log buffered size
10.10
Description
Configures the device to not store log messages in a RAM buffer
Logging control
Store log messages in a RAM buffer
log buffered
no log buffered
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B