Enable - Allied Telesis SwitchBlade x908 Series Software Reference Manual

do
This command lets you to run Exec and Privileged Exec mode commands when you are in a
configuration mode.
Syntax
do <line>
Parameter
<line>
Any configuration mode
Command Mode
Example

enable

This command enters the Privileged Exec command mode.
Syntax
enable
Exec mode
Mode
The following example shows the use of the enable command to enter the Privileged Exec
Examples
mode (note the change in the command prompt).
disable
Related Commands
exit
C613-50007-01 REV B
Description
Specify the command and its parameters.
awplus# configure terminal
awplus(config)# do ping 192.0.2.23
awplus#
awplus#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
enable
CLI Navigation Commands
4.3