Show Ip Bgp Summary - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip bgp summary

Use this command to display a summary of BGP neighbor status.
Syntax show ip bgp summary
show ip bgp <prefix> summary
Parameter
<prefix>
unicast
multicast
Privileged Exec mode and Exec mode
Mode
Example
This is a sample output, displaying a summary of BGP neighbor status
Output
Figure 38-10: Example output from the
.
C613-50007-01 REV B
Description
{multicast|unicast}
Specifies a IPv4 unicast address family. This is the default option.
Configures parameters relating to the BGP exchange of routes to unicast
destinations.
Specifies a IPv4 multicast address family. Configures parameters relating to
the BGP exchange of routes to source addresses of multicast streams.
awplus# show ip bgp summary
awplus# show ip bgp summary
BGP router identifier 10.10.15.50, local AS number 65000
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State
PfxRcd
10.10.9.50 4 65000
10.10.14.51 4 100
Total number of neighbors 2
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show ip bgp summary
460 595 0 0
93 1200 0 0
BGP Commands
command
0 00:17:48 3
00:42:16
38.117