Show Debugging Mstp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show debugging mstp

Use this command to display the MSTP debugging option set.
To modify the lines displayed, use the | (output modifier token); to save the output to a file
use the > output redirection token.
Syntax
show debugging mstp
Privileged Exec mode
Mode
Example
This is a sample output from the show debugging mstp command.
Output
MSTP debugging status:
debug mstp (RSTP and STP)
Related Commands
C613-50007-01 REV B
awplus# show debugging mstp
awplus# debug mstp packet rx
awplus# show debugging mstp
MSTP receiving packet debugging is on
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Spanning Tree Commands
19.11