Completing Keywords - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Getting Started
Example To see which show commands that start with "i" are available in Privileged Exec mode, enter
"?" after show i:
This results in the following output:
Figure 1-3: Example output from the show i? command
Example To use the ? help to work out the syntax for the clock timezone command, enter the following
sequence of commands:
The above example demonstrates that the ? help only indicates what you can type next. For
commands that have a series of parameters, like clock timezone, the ? help does not make the
number of parameters obvious.

Completing keywords

To complete keywords, type Tab after part of the command.
If only one keyword matches the partial command, the AlliedWare Plus OS fills in that
keyword. If multiple keywords match, it lists them.
Example In this example we use Tab completion in successive steps to build the complete command
show ip dhcp server summary. We have included "<Tab>" to show where to type the Tab
key - this is not displayed on screen.
1.6
awplus#
interface
ip
ipv6
awplus(config)#
summer-time Manage summer-time
timezone Set clock timezone
awplus(config)#
TIMEZONE Timezone name, up to 5 characters
awplus(config)#
minus negative offset
plus positive offset
awplus(config)#
<0-12> Time zone offset to UTC
awplus(config)#
awplus#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show i?
Select an interface to configure
Internet Protocol (IP)
Internet Protocol version 6 (IPv6)
clock ?
cloc timezone ?
clock timezone NZST ?
clock timezone NZST plus ?
clock timezone NZST plus 12
show ip <Tab>
C613-50007-01 REV B