Viewing Temperature, Voltage, And Fan Status - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Viewing temperature, voltage, and fan status

The switch monitors the environmental status of the switch and its power supplies and fan. To
display this information, enter User Exec or Privileged Exec mode and enter the command:
The output looks like the following figure. This device has a power supply unit in the first PSU
bay and a fan in the second PSU bay.
Environment Monitoring Status
Overall Status: Normal
Resource ID: 1 Name: PSU bay 1
ID Sensor (Units)
1 Device Present
2 PSU Overtemp
3 PSU Fan Fail
4 PSU Power Output
Resource ID: 2 Name: PSU bay 2
ID Sensor (Units)
1 Device Present
2 PSU Overtemp
3 PSU Fan Fail
4 PSU Power Output
Resource ID: 3 Name: x900-24XT-N
ID Sensor (Units)
1 Voltage: 2.5V (Volts)
2 Voltage: 1.65V (Volts)
3 Voltage: 3.3V (Volts)
4 Voltage: 1.8V (Volts)
5 Voltage: 12V (Volts)
6 Temp: Ambient (Degrees C)
7 Temp: Mid Internal (Degrees C)
8 Temp: Bk Internal (Degrees C)
C613-50007-01 REV B
awplus# show system environment
Reading
Reading
Reading
12.000
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Low Limit High Limit Status
Yes -
No -
No -
No -
Low Limit High Limit Status
Yes -
No -
No -
Yes -
Low Limit High Limit Status
2.565 2.344
1.629 1.488
3.334 2.973
1.771 1.615
10.813
33 -127
52 -127
47 -127
Getting Started
- Ok
- Ok
- Ok
- Ok
- Ok
- Ok
- Ok
- Ok
2.865 Ok
1.816 Ok
3.627 Ok
1.979 Ok
13.188 Ok
55 Ok
85 Ok
75 Ok
1.21