Clear Mac Address-Table Static - Allied Telesis SwitchBlade x908 Series Software Reference Manual

clear mac address-table static

Use this command to:
■
■
Syntax
clear mac address-table static [address <mac-address>|vlan <vid>|
Parameter
vlan
interface
<vid>
<port>
<mac-address>
Privileged Exec mode
Mode
Use this command with options to clear the filtering database of all entries made from the CLI
Usage
for a given MAC address, interface or VLAN. Use this command without options to clear any
entries made from the CLI. Compare this usage with clear mac address-table dynamic.
This example shows how to clear all filtering database entries configured through the CLI.
Examples
This example shows how to clear all filtering database entries for a given interface configured
through the CLI.
This example shows how to clear filtering database entries filtering database entries configured
through the CLI for a given mac address.
clear mac address-table dynamic
Related Commands
mac address-table static
show mac address-table
C613-50007-01 REV B
clear all filtering database entries configured through CLI (static)
clear all static database entries based on a mac address
interface <port>]
Description
Filtering database entries for the given VLAN.
Filtering database entries for the given port.
The VLAN IDs to be cleared from the database.
Value range is 1-4094.
The port from which address entries will be cleared. This can be a single
port, such as port1.1.4, a static channel group, such as sa3, or an LACP
channel group, such as po4.
The mac address to be cleared from the database.
awplus# clear mac address-table static
awplus# clear mac address-table static interface port1.1.3
awplus# clear mac address-table static address 0202.0202.0202
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Switching Commands
15.3