File Management Commands
show running-config ip route
show running-config ipv6 routeCommand
Use this command to show the running system static IPv4 route configuration.
For information on output options, see
Syntax
show running-config ip route
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-16: Example output from the show running-config ip route command
Output
copy running-config
Related Commands
show running-config
show running-config ipv6 access-list
show running-config ipv6 access-listCommand
Use this command to show the running system status and configuration for ipv6 access-list.
For information on output options, see
Syntax
show running-config ipv6 access-list
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-17: Example output from the show running-config ipv6 access-list command
Output
copy running-config
Related Commands
show running-config
7.34
New
vs_531
%flag
awplus#
show running-config ip route
!
ip route 3.3.3.3/32 vlan3
ip route 3.3.3.3/32 vlan2
!
New
vs_531
%flag
awplus#
show running-config ipv6 access-list
!
ipv6 access-list abc permit any
!
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
File Management Commands
Use this command to show the running system static IPv4 route configuration.
"Controlling "show" command output" on page
File Management Commands
Use this command to show the running system status and configuration for ipv6 access-list.
"Controlling "show" command output" on page
1.30.
1.30.
C613-50007-01 REV B