Show Clock - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

show clock

This command displays the system's current configured local time and date. It also displays
other clock related information such as timezone and summertime configuration.
Syntax
show clock
Exec and Privileged Exec mode.
Mode
To display the system's current local time, use the command:
Example
Figure 8-1: Example output from the show clock command for a device using New Zealand
Output
time
Parameters in output of the show clock command
Parameter
Local Time
UTC Time
Timezone
Timezone Offset
Summer time zone
Summer time starts
Summer time ends
Summer time offset
Summer time
recurring
clock set
Related Commands
clock summer-time date
clock summer-time recurring
clock timezone
8.14
awplus#
Local Time: Mon, 6 Aug 2007 13:56:06 +1200
UTC Time: Mon, 6 Aug 2007 01:56:06 +0000
Timezone: NZST
Timezone Offset: +12:00
Summer time zone: NZDT
Summer time starts: Last Sunday in September at 02:00:00
Summer time ends: First Sunday in April at 02:00:00
Summer time offset: 60 mins
Summer time recurring: Yes
Meaning
Current local time.
Current UTC time.
The current configured timezone name.
Number of hours offset to UTC.
The current configured summertime zone name.
Date and time set as the start of summer time.
Date and time set as the end of summer time.
Number of minutes that summer time is offset from the system's
timezone.
Whether the device will apply the summer time settings every
year or only once.
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show clock
C613-50007-01 REV B