Banner Motd - Allied Telesis SwitchBlade x908 Series Software Reference Manual

banner motd

This command displays a text MOTD (Message-of-the-Day) banner on login. The MOTD
banner is displayed on all connected terminals. The MOTD banner is useful for sending
messages that affect all network users, for example, any imminent system shutdowns.
Use the no parameter to not display a text MOTD (Message-of-the-Day) banner on login.
Syntax
banner motd <motd-text>
no banner motd
Global Configuration mode
Mode
By default, no motd is displayed at console login.
Default
To configure a motd banner to be displayed when you login, issue the following commands:
Example
:
To remove the login banner, issue the following commands::
banner exec
Related Commands
banner login
C613-50007-01 REV B
awplus>enable
awplus#configure terminal
awplus(config)#banner motd system shutdown at 6pm
awplus(config)#exit
awplus#exit
system shutdown at 6pm
awplus login: manager
Password:
AlliedWare Plus (TM) 5.3.1 11/14/08 13:03:59
awplus>enable
awplus#configure terminal
awplus(config)#no banner motd
awplus(config)#exit
awplus#exit
awplus login: manager
Password:
AlliedWare Plus (TM) 5.3.1 11/14/08 13:03:59
awplus>
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
System Configuration and Monitoring Commands
8.5