Router Bgp View - Allied Telesis SwitchBlade x908 Series Software Reference Manual

router bgp view

Use this command to create a named BGP view. BGP views can have the same or different
Autonomous System (AS) number. BGP view is only for exchanging BGP routing information.
Use the no parameter with this command to disable a named BGP view.
Syntax
router bgp ASN view <view_name>
no router bgp ASN view <view_name>
Parameter
ASN
<view_name>
Global Configuration mode
Mode
Specify bgp multiple-instance before applying router bgp view so you can setup a route
Usage
server:
If you have enabled bgp with the router bgp command you must disable bgp with the no
router bgp command before you can specify bgp multiple-instance.
Example
awplus(config-router)#
bgp multiple-instance
Related Commands
clear bgp view
clear ip bgp view
router bgp
show ip bgp view
show ip bgp view summary
show ip bgp view neighbors
C613-50007-01 REV B
Description
<1-65525> Specifies the Autonomous System (AS) number.
Specifies BGP view name.
router bgp 1 view 1
neighbor 10.0.0.1 remote-as 2
neighbor 10.0.0.2 remote-as 3
!
router bgp 2 view 2
neighbor 10.0.0.3 remote-as 4
neighbor 10.0.0.4 remote-as 5
awplus# configure terminal
awplus(config)# bgp multiple-instance
awplus(config)# router bgp 12 view bgp12
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
BGP Commands
38.101